Top
Kent USA KLS-1860V
- 7.5 HP main spindle motor, 2 speed ranges with infinitely variable speed
- D1-8 camlock, 3.1” spindle bore
- Hardened and ground gears and bedways
- Jog button, multi-position feed stops
- Inch dials and leadscrews
- Centralized lube system in headstock
- Safety Foot brake
| Swing Over Bed |
18″ |
| Swing Over Cross Slide |
10.8″ |
| Swing Over Gap |
27.5″ |
| Width of Bed |
13″ |
| Distance Between Centers |
60″ |
| Cross Slide Travel |
11″ |
| Top Slide Travel |
4″ |
| Spindle Speeds |
12 |
| Spindle Speed Range |
200-2000 RPM |
| Through Hole Diameter |
3.2″ |
| Spindle Nose |
D1-8 Camlock |
| Spindle Bore Taper |
MT#7 w/ sleeve |
| Thread – Standard (Whit-worth) |
61 (1-5/8 to 72) tpi |
| Thread – Metric Pitch |
28 (0.5 to 20) mm |
| Longitudinal Feed |
0.0015”-0.0913” in/rev |
| Cross Feed |
0.0006”-0.0365” in/rev |
| Lead Screw Diameter |
1.4″ |
| Threading Pitch |
4 TPI |
| Quill Travel |
5″ |
| Quill Diameter |
3” |
| Quill Bore Taper |
MT#5 |
| Main Motor |
7.5 HP |
Coolant Pump Motor |
1/8 HP |
| Machine Dimension |
112″ x 40″ x 50″ |
| Packing Dimension |
120″ x 45″ x 72″ |
| Machine weight |
5830 lbs |
| Packing weight |
6380 lbs |
Standard Accessories
- 3-jaw chuck (10”), 4-jaw chuck (10”)
- Face plate (16”),Steady rest (3.5”), Follow rest (1-3”)
- 4-way tool post, thread chasing dial
- Coolant system, Full length splash guard
- Worklight, standard tools
Optional Accessories
- DRO system (Acu-Rite, Newall, etc.) (View Brochure)
- DRO installation charge
- Aloris CA #4-set (tool post plus 6 bars)
- 5C lever style collet closer
- Royal spindle type live center (M.T. #5)
- BTC 3-jaw chuck w/back plate (Zero-set, 10” D1-8)
- BTC 3-jaw chuck w/back plate (Zero-set, 12” D1-8)
- Taper turning attachment
- Rustlick coolant (1 gallon, mixes 1:30)
Reviews
There are no reviews yet.