Kent USA CS-2280
- 10 HP Spindle Motor, 12-Speeds
- Precision Spindle with 3 Point Support
- 3.2” Spindle Through Hole
- Hardened and ground spindle gears and shafts; hardened and ground bedways
- Solid Full Length Casting Base; Full-length Safety Foot Brake
- Spindle Jog Button Control
- One-shot/Auto Lubrication for Apron, Carriage, and Bed Ways
- Multi-position Adjustable Feed Position Stops
- Dual Inch/Metric Calibrated Tailstock Quill
Download Kent USA CS-2280 Precision Lathe (Email) Brochure
| Swing Over Bed |
22″ |
| Swing Over Cross Slide |
14.2″ |
| Swing Over Gap |
30.7″ |
| Width of Bed |
13.2” |
| Distance Between Centers |
86.5″ |
| Cross Slide Travel |
10.2″ |
| Top Slide Travel |
5″ |
| Spindle Bore |
3.15″ |
| Spindle Speeds |
12 |
| Spindle Speed Range |
25-1500 RPM |
| Through Hole Diameter |
3.2″ |
| Spindle Nose |
D1-8 |
| Spindle Bore Taper |
MT#5 |
| Thread – Standard (Whit-worth) |
45 (2-72) TPI |
| Thread – Metric Pitch |
41, 0.2 – 14 mm |
| Longitudinal Feed |
0.0015″–0.04″ in/rev |
| Cross Feed |
0.00075″–0.02″ in/rev |
| Lead Screw Diameter |
– |
| Threading Pitch |
– |
| Quill Travel |
5.9” (150mm) |
| Quill Diameter |
2.95″ |
| Quill Bore Taper |
MT#5 |
| Main Motor |
10 HP |
| Coolant Pump Motor |
1/8 HP |
| Machine Dimension |
– |
| Packing Dimension |
138″ x 39″ x 61″ |
| Machine weight |
5104 lbs |
| Packing weight |
5408 lbs |
Standard Accessories
- 3-jaw chuck (12″)
- 4-position tool post
- Thread chasing dial
- Steady rest
- Coolant system
Optional Accessories
- DRO System 80”(2-axis, x=0.0001”/z=0.0005” res)
- Aloris CA #4-SET (Tool Post and 6 holders)
- Aloris DA #5-SET (Tool Post and 6 holders)
- Royal spindle type live center (M.T. #5)
- BTC 3-jaw chuck w/back plate (Zero-set, 12” D1-8)
- 4-jaw independent Chuck (12” or 16″ D1-8)
- Face plate (20” D1-8)
- Taper turning attachment
- Micrometer carriage stop
Reviews
There are no reviews yet.