Products

Commonwealth Industrial / Kent USA HR-35 Series

Kent USA HR-35 Series Manual Precision Lathe

OUT OF STOCK

Kent USA HR-35 Series

20 HP Spindle Motor, 12-Speeds
4.1” (6.1” Opt)Spindle Through Hole
Solid One Piece Full Length Casting Base and Bedways for Maximum Rigidity
Spindle Jog Button Control
One-shot Lubrication for Apron, Multi-position Adjustable Feed Position Stops
Dual Inch/Metric Calibrated Tailstock Quill with Knockout Tang; Heavy Duty Two Speed Tailstock
Dual Inch/Metric Dials (Optional)

Category: Manual Precision Lathes

Swing Over Bed	34.6″
Swing Over Cross Slide	25.2″
Swing Over Gap	46″
Width of Bed	19″
Distance Between Centers	120″ (Opt. 80″ / 160″ / 200″)
Cross Slide Travel	17.32″
Top Slide Travel	9.4″
Spindle Bore	4.1″ (Opt. 6.1″)
Spindle Speeds	12
Spindle Speed Range	14-1000 RPM
Through Hole Diameter	4.1″ (Opt. 6.1″)
Spindle Nose	D1-11 or A1-11
Spindle Bore Taper	MT#7 – MT#5
Thread – Standard (Whit-worth)	45 (2-72) TPI
Thread – Metric Pitch	39 (0.2-14) mm
Longitudinal Feed	0.002″–0.0276″ in/rev
Cross Feed	0.001″–0.00138″
Quill Travel	12″
Quill Diameter	4.133″
Quill Bore Taper	MT#6
Main Motor	20 HP
Coolant Pump Motor	1/8 HP
Packing Dimension	198″ x 69″ x 73″

Standard Accessories

3-position carriage stop
4-position tool post
Steady rest
Halogen work light
Thread chasing dial
Coolant system

Optional Accessories

Digital Readout System
Chuck cover
4-jaw independent chuck
Face plate
Royal spindle type live center
Taper turning attachment
BTC 3-jaw chuck with back plate
Micrometer carriage stop
Rustlick coolant

Reviews

There are no reviews yet.

Be the first to review “Kent USA HR-35 Series”