Kent USA JY-VH450
- 10 HP spindle motor infinitely variable speed, #50 taper spindle, 17.7” x 59” hardened and ground table top
- Saddle and base with hardened and ground square (box) ways
- Precision ACME screws in X, Y, & Z axes
- X, Y, & Z axes driven by AC motor
- Precision bored and ground milling head, with super precision ABEC-7 bearings
- Meehanite® casting, with built in coolant reservoir in machine base
- Coolant system and chip tray
- Centralized automatic lubrication, with metered check-valves
- Precise angular contact bearings spindle
- Precision manufactured from SCM21 alloy steel, heat treated and precision ground spindle
- Hardened and precision ground for quiet running gears
- High torque servo motor X-axis feed
- Choice of Fanuc or Mitsubishi CNC controller
- Hardened, precision ground, and Turcite-B coated sideways for maximum wear resistance
- Convertible into CNC controlled system
Download Kent USA JY Series Combination Mills Brochure
| Table Size |
17.7″ x 59″ |
| Table Travel (X-Axis) |
43″ |
| Saddle Travel (Y-Axis) |
28.35″ |
| Knee Travel (Z-Axis) |
30.7″ |
| T-Slot |
0.71″ x 0.12″ x 3.15″ |
| X, Y, Z Feedrate |
1″/min – 59″/min |
| X, Y, Z Rapid Feedrate |
59″/min |
| Spindle Motor |
10 HP |
| Vertical Spindle Speed |
45 – 1500 RPM (variable) |
| Vertical Spindle Taper |
NT-50 |
| Spindle Nose to Table |
0 – 24″ |
| Spindle Center to Column |
17.7″ |
| Horizontal Spindle Speed |
45 – 1500 RPM (variable) |
| Horizontal Spindle Taper |
NT-50 |
| Spindle Center to Table |
0 – 30.7″ |
| Spindle Nose to Rear |
7.5″ |
| Maximum Work Load |
2200 lbs |
| Machine Net Weight |
9240 lbs |
| Shipping Weight |
11000 lbs |
| Dimensions |
108″ x 80″ x 100″ |
Standard Accessories
- Cooling System
- Tool Box
- Spindle Draw Bar Screw
- Leveling Pad
- Adjustment Bolt
Optional Accessories
- Dro System
- Air Power Drawbar (Per Spindle)
- Angle-Lock Vice
- Rotary Table (Vertical and Horizontal)
- Clamping Kit
- Chuck System
- Rustlick Coolant (1 Gal, Mixes 1:30)
Reviews
There are no reviews yet.