Kent USA BM-3
- Rigid Spindle/Head housing with powerful 3 hp vector drive spindle motor
- 80 – 4500 rpm programmable spindle provides greater range of machining capability
- Metal telescopic way cover on front saddle ways for enhance durability
- X-axis and Y-axis metal hand wheels for manual operation and set ups
- Automatic lubrication system with metered check valves
- Programmable flood coolant with splash guards and chip pan
- Built-in coolant reservoir in machine base
- Certified Meehanite® machine casting for superior dampening and stability
Download Kent USA BM-3 CNC Bed Mill Brochure
| Table Size |
10″ x 50″ |
| Table Travel (X-Axis) |
34″ |
| Saddle Travel (Y-Axis) |
16″ |
| Vertical Travel (Z-Axis) |
24″ |
| Spindle Center to Column |
17.8″ |
| Spindle to Table |
2″ to 26″ |
| Quill Travel |
5″ |
| Quill Diameter |
3-3/8″ |
| T-Slots (number x width) |
3 x 5/8″ |
| Coolant Pump |
0.25 HP |
| Spindle Motor |
3 HP |
| Spindle Taper |
R8 (#30 Optional) |
| Speed Range |
60-550-4500 RPM |
| Quill Power Feed (per rev) |
0.0017″ / 0.0032″ / 0.0054″ |
| Drilling Capacity (Manual) |
1″ |
| Drilling Capacity (Power) |
0.37″ |
| Boring Capacity |
6″ Diameter |
| Milling Capacity |
2.5 in³/min |
| Maximum Work Load |
1480 lbs (distributed) |
| Net Weight |
3960 lbs |
| Gross Weight |
4100 lbs |
| Packing Dimension |
78″ x 51″ x 80″ |
| Power Requirements |
220 volts, 60 Hz, 3-phase, 60 Amps |
Standard Accessories
- Acu-Rite® MillPwr-G2 (3-Axis CNC) conversational control with 12.1” color LCD (Opt. Intek Control)
- Manual/DRO, conversational, and G-code operational modes
- Dual USB (front/back) ports, Ethernet port, and RS-232 port
- Programmable spindle speed control and spindle speed override knob
- Programmable flood coolant (M08), splash guards and chip pan
- Automatic lubrication system and work light
- Standard tools and manuals
- 2-year MillPwr-G2 system warranty
Optional Accessories
- Quill scale feedback with linked Z-axis compensation
- Linear glass scale feedback option (X/Y/Z)Electronic edge finder (0.5” shank, 0.2” tip)
- Electronic edge finder (16mm shank, 6mm tip)
- Touch probe KT-130
- Off-Line Software (desktop programming option)
- Internal transformer to provide 120V for CNC control
(120V for CNC so that separate 120V source not needed)
- Air power drawbar
- Option for 440V electrics instead of 220V 3PH power
- Multi-tap transformer 440~480V primary to 220V, 20KVA
- Machine start up installation and operator training
- Programmable rotary table indexer
Reviews
There are no reviews yet.